We now have a small kit with the special screws needed to properly attach Ford fan clutches to the water pump. These special screws feature an undersize 7/16 Size head for clearance. Made in the usa!…
Maximum Airflow At Low RPM
Reduced Eng. Load At High RPM
Less Resistance At Hwy Speeds
More Horsepower
Better Gas Mileage
2.25 in. Projected Width
10000 RPM Rating
Standard Mounting Pattern
…
390 & 428 Fan Alt w/o smog (air) pump w/ AC WP = Water Pump Std = Standard (manual) Tran = Transmission Gen = Generator Amp = Ampere Alt = Alternator LN = Leece-Neville (Alt) w/o = without w/ = with PS = Power Steering AC = Air…
Flex-a-lite® reversible 16-inch Syclone S-Blade electric-fan. A powerful electric motor helps this fan move an impressive 2,500 cfm of airflow. Can be used as an auxiliary or primary cooling.
Puller: Yes
Pusher: Yes
Fan CFM Range…
S.A.High quality reproduction manufactured of abs plastic used on Torino and Rancheros equipped with small black 302, 351 engines without air conditioning. Standard cooling.Fan shrouds do not include mounting hardware. The height is 20 1/2…
Set of 4 Mounting Hardware Included Reproduction of the original fan shroud bracket set used on 63/66 Falcons and Rancheros with 260, 289, and 302 engines. Comes complete as a set of 4 with mounting hardware.…
S.A.Quality reproduction shroud used on 351 engine with air. Fits engines with air conditioning w/ 24 Radiator. Fits Mustang 68/69 w/289 and 302, also 68 GT 350 w/24 Radiator. Fan shrouds do not include mounting hardware. The height is 20…
S.A.Dearborn Classics offers high quality reproduction fan shrouds for most models of Ranchero, Fairlane and Torino. All of our fan shrouds are manufactured of durable ABS plastic and are manufactured in the U.S.A. Fan shrouds feature…
S.A.High quality reproduction manufactured of abs plastic used on Torino and Rancheros equipped with big block 429 engines. Fits 70/71 429/429 cj only. Also fits 71 Mustang w 429 cj and scj. Fan shrouds do not include mounting hardware…
Steel reproduction of original fan shroud used in 63/66 Falcons and Rancheros with 260 and 289 engines. Fits 260, 289 engines only. This will not work on a car with factory air! Fan shrouds do not include brackets, brcakets sold…
Newly designed abs plastic fan shroud is engineered to replace the original steel fan shroud and provide more air flow and greater cooling efficiency than the original shroud. Our new design is thicker than Other models and has a special…
New fan clutches are available for a large variety of Ford inline 6 cylinders and v-8's. Upgrade your tired original with this new fan clutch for improved reliability in your cooling system. Both thermally and non-thermally activated…
Used on all 1969 390 ip (improved performance)and 428 Cobra jet Torinos / cyclones. Also used on v coded 1969 models from 2/17/69. This fan was also used on 1970 Cobra jets equipped with ac. Stamped with the engineering number h c9ze e on…
Exact replica of the original 289 high performance fan blade used on cars equipped with K Code motors. This is made in exact detail and features correct blade size and markings as original. This blade is specific to original high…
17 Diameter Correct reproduction five blade fan used on Rancheros, Falcons, Fairlane and Comets equipped with 260, 289 engines. Replaces four blade fan.…
Draws 14-22 Amps The Flex-A-Lite Dual Electric Radiator Fan System is the most powerful system on the market today. It pulls 2500 CFM and totally eliminates the need for the stock fan and shroud. The dual 12 fans fit compactly in a shroud…
The Flex-a-lite® Quick Start Variable Temperature Controller turns the electric fan on and off at the desired temperature. You can easily adjust the activation temperature between approximately 160-240 degrees Fahrenheit. It also turns…
Flex-A-Lite auxiliary illuminated switches provide cockpit control or override of fan function. These switches may be wired to actuate a fan regardless of temperature settings (at the end of a heat or at the beginning of a hard pull), or…
Flex-a-lite® 15-inch Black Magic Xtreme S-Blade reversible electric fans feature 3,300 cfm of airflow. Replacing a belt-driven fan with one of these powerful electric fans can recover engine power and increase fuel economy. These fans…
Ford Mustang Fan Shroud Brackets 
2 Core
Fits 1964 To 1966 Ford Mustang
 
Now made by Scott Drake. Includes mounting hardware. Fits 1964 to 1966 Ford Mustang.
…
My Account
