NOS is making available replacement siphon tubes for its most popular nitrous bottles. We offer the siphon tubes for 5 lb all the way up to 20 lb bottles. These 3/8" I.D. tubes are made from 6061 aluminum and can be used on any NOS Hi-Flo or Super Hi-Flo bottle valve. This screw-on siphon tube can be used as an upgrade for an older style compression fitting tube.
Features:
- Made From 6061 Aluminum
- Tube is 3/8” I.D. for Maximum Flow
- For use with NOS 10lb. Bottles with Super Hi-Flo Valve Only
- Designed to Replace Old Style Compression Fitting Siphon Tube
- Service Part for NOS Bottle Valves
NEEDED FOR INSTALLATION:
1. 1" Socket
2. In-lb torque wrench
3. Ft-lb torque wrench
4. Vice with aluminum jaws such as 1004ERL, found on the Holley website, or another method
capable of holding the siphon tube without deformation.
5. Medium strength thread locker such as Loctite 242® or equivalent.
6. Tube/pipe/conduit bending tool with minimum 3" radius
Installation Notes:
NEEDED FOR INSTALLATION:
1. 1" Socket
2. In-lb torque wrench
3. Ft-lb torque wrench
4. Vice with aluminum jaws such as 1004ERL, found on the Holley website, or another method
capable of holding the siphon tube without deformation.
5. Medium strength thread locker such as Loctite 242® or equivalent.
6. Tube/pipe/conduit bending tool with minimum 3" radius