×

PLEASE NOTE: As of August 1, 2023 our Windsor location will no longer be open for Walk-In Traffic

877.352.5355 Contact Us Mon-Fri 10a-6p & Sat 10a-3p EST
DRIVEN BY CARE
Home

Hays Twister 3/4 Race Torque Converter 97-2E24Q

Hays Twister 3/4 Race Torque Converter 97-2E24Q
Hays Twister 3/4 Race Torque Converter 97-2E24QHays Twister 3/4 Race Torque Converter 97-2E24QHays Twister 3/4 Race Torque Converter 97-2E24QHays Twister 3/4 Race Torque Converter 97-2E24QHays Twister 3/4 Race Torque Converter 97-2E24QHays Twister 3/4 Race Torque Converter 97-2E24QHays Twister 3/4 Race Torque Converter 97-2E24Q
$711.99 ea
NEWARRIVING SOONEstimated Ship Date 10/25/2023 (If Ordered Today)3 available from HOLLEY PERFORMANCE PRODUCTS as of 10/03/2023
Model: 4007124
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
STANDARD
DELIVERY
Hays Performance Drivetrain is proud to announce Twister 3/4 Race Performance Torque Converters. These NEW torque converters are a perfect addition to Hays product line of performance flexplates, clutches, and flywheels. The 3/4 Race torque converter is the first series being brought to market and is intended for street/strip combinations, with various RPM stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss.
Features:
  • Converters Built/Tested/Proven Support To 650 HP
  • Hand Built And Inspected In Every Step Of Assembly
  • All Convertors Are Internally Welded For Longer Life
  • Heavy Duty Torrington Bearings For Strength/Durability
  • Stators Are Chosen W/High Flow Vents/Channels To Promote Cooling
  • Increased HP/Acceleration Due To A Weight Saving Design
  • Industry Leading Tech Support Team Available For Assistance
Holley Performance Emission Code 5: This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled (Non-Emissions Controlled) Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations
Installation Notes:
Warning: The 3/4 RACE series converters are NOT designed to be used with Nitrous Oxide or Trans-Brakes Note: HAYS recommends an external transmission cooler for all Twister 3/4 Race Converters (A minimum size of 18,000 GVW or 15,000 BTU Rating.) Note: Stall ranges will vary depending on engine set-up, weight of vehicle, and gear ratio (Please see converter selector in tech resources for more info)

About Hays

Drag racing's biggest stars have relied on Hays clutches since SEMA Hall of Famer Bill Hays decided back in 1958 that there had to be a way to build one that could stand up to racing's unimaginable power and torque. Now part of Holley Performance, Hays continues to develop complete clutch kits for an infinite number of high-performance applications, pressure plates for precise gear changes, clutch discs for smooth, chatter-free engagement, and flywheels and flexplates ideal for today's vehicles.

Downloads:

Download Name File Size
199r11350.pdf162.28KB

Videos:

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years Engine Fitment Notes
Ford Mustang II 1974 2.8L / 171 / V6
2.3L / 140 / L4		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang II 1975 5.0L / 302 / V8
2.3L / 140 / L4
2.8L / 171 / V6		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang II 1976 5.0L / 302 / V8
2.3L / 140 / L4
2.8L / 171 / V6		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang II 1977 5.0L / 302 / V8
2.3L / 140 / L4
2.8L / 171 / V6		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang II 1978 2.8L / 171 / V6
5.0L / 302 / V8
2.3L / 140 / L4		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1964 4.7L / 289 / V8
4.3L / 260 / V8
3.3L / 200 / L6
2.8L / 170 / L6		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1965 4.7L / 289 / V8
4.3L / 260 / V8
3.3L / 200 / L6
2.8L / 170 / L6		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1966 4.7L / 289 / V8
3.3L / 200 / L6		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1967 6.4L / 390 / V8
4.7L / 289 / V8
7.0L / 428 / V8
3.3L / 200 / L6		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1968 7.0L / 428 / V8
6.4L / 390 / V8
4.7L / 289 / V8
3.3L / 200 / L6
5.0L / 302 / V8
7.0L / 427 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1969 7.0L / 428 / V8
6.4L / 390 / V8
4.1L / 250 / L6
3.3L / 200 / L6
7.0L / 429 / V8
5.0L / 302 / V8
5.8L / 351 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1970 7.0L / 428 / V8
4.1L / 250 / L6
3.3L / 200 / L6
7.0L / 429 / V8
5.8L / 351 / V8
5.0L / 302 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1971 7.0L / 429 / V8
4.1L / 250 / L6
5.8L / 351 / V8
5.0L / 302 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1972 4.1L / 250 / L6
5.8L / 351 / V8
5.0L / 302 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1973 4.1L / 250 / L6
5.0L / 302 / V8
5.8L / 351 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1979 3.3L / 200 / L6
5.0L / 302 / V8
2.3L / 140 / L4
2.8L / 171 / V6		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1980 3.3L / 200 / L6
2.3L / 140 / L4
4.2L / 255 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Ford Mustang 1981 3.3L / 200 / L6
4.2L / 255 / V8
2.3L / 140 / L4		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Capri 1967 3.3L / 200 / L6 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Capri 1971 2.0L / 122 / L4
1.6L / 98 / L4		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Capri 1972 2.6L / 156 / V6
2.0L / 122 / L4
1.6L / 98 / L4		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Capri 1973 2.6L / 156 / V6
2.0L / 122 / L4		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Capri 1974 2.8L / 171 / V6
2.0L / 122 / L4		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Capri 1975 2.8L / 171 / V6
2.3L / 140 / L4		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Capri 1976 2.3L / 140 / L4
2.8L / 171 / V6		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Capri 1977 2.3L / 140 / L4
2.8L / 171 / V6		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Capri 1979 2.3L / 140 / L4
2.8L / 171 / V6
3.3L / 200 / L6
5.0L / 302 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Capri 1980 2.3L / 140 / L4
3.3L / 200 / L6
4.2L / 255 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Capri 1981 2.3L / 140 / L4
3.3L / 200 / L6
4.2L / 255 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1967 6.4L / 390 / V8
4.7L / 289 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1968 7.0L / 428 / V8
6.4L / 390 / V8
7.0L / 427 / V8
4.7L / 289 / V8
5.0L / 302 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1969 7.0L / 429 / V8
7.0L / 428 / V8
5.8L / 351 / V8
6.4L / 390 / V8
5.0L / 302 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1970 7.0L / 429 / V8
7.0L / 428 / V8
5.8L / 351 / V8
6.4L / 390 / V8
5.0L / 302 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1971 7.0L / 429 / V8
5.8L / 351 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1972 5.8L / 351 / V8 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1973 7.5L / 460 / V8
5.8L / 351 / V8
6.6L / 400 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1974 7.5L / 460 / V8
6.6L / 400 / V8
5.8L / 351 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1975 7.5L / 460 / V8
6.6L / 400 / V8
5.8L / 351 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1976 6.6L / 400 / V8
7.5L / 460 / V8
5.8L / 351 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1977 6.6L / 400 / V8
5.8L / 351 / V8
5.0L / 302 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1978 6.6L / 400 / V8
5.8L / 351 / V8
5.0L / 302 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1979 5.8L / 351 / V8
5.0L / 302 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1980 3.3L / 200 / L6
4.2L / 255 / V8
5.0L / 302 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio
Mercury Cougar 1981 3.3L / 200 / L6
5.0L / 302 / V8
2.3L / 140 / L4
4.2L / 255 / V8		 2400-2800 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot
For Technical Support Call 1-866-464-6553~For Use w/Case Filled Transmissions~Hays Recommends An External Trans Cooler Min Size 18000 GVW/15000 BTU~Not Designed To Be Used w/Nitrous Oxide Or Trans-Brakes~Stall Ranges Vary Depending On Engine Setup/Weight Of Vehicle/Gear Ratio

Specifications:

Anti Balloon Plate No
Anti-Balloon Plate No
Balanced Yes
Bolt Circle 10-1/2"
Bolt Circle Diameter 10.500 in.
Crank Pilot Diameter 1.375 in.
Diameter 10"
Diameter (in.) 10.000 in.
Emission Code 5
Input Shaft Spline Quantity 26
Input Spline 26
Lock Up Type No
Lock Up/Overdrive No
Part Type Automatic Transmission Torque Converter
Series 3/4 Race
Stall 2400-2800
Stall Speed (RPM) 2400-2800
Trans Model Ford- C- 4 (Auto) 3 Speed
Trans Year 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1966, 1967, 1968, 1969, 1970, 1978, 1979, 1980, 1981, 1965, 1963, 1964
Transmission C4 Case-Filled
Transmission Model C4 Case-Filled
Use with Power Adder No
Use with Trans-Brake No
WARNING CA Proposition 65 WARNING: Cancer and Reproductive Harm

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Hays Twister 3/4 Race Torque Converter 97-2E24Q:
Reason for Inquiry:

Related Products

Hays Twister Full Race Torque Converter 97-2D28F
Hays Twister Full Race Torque Converter 97-2D28F
Model: 4007118
Condition: NEW
$1,144.99 ea
Hays Twister 3/4 Race Torque Converter 97-2F28Q
Hays Twister 3/4 Race Torque Converter 97-2F28Q
Model: 4007134
Condition: NEW
$726.99 ea
Hays Twister Full Race Torque Converter 97-2E42F
Hays Twister Full Race Torque Converter 97-2E42F
Model: 4007130
Condition: NEW
$1,391.99 ea
Hays Twister 3/4 Race Torque Converter 97-2E32Q
Hays Twister 3/4 Race Torque Converter 97-2E32Q
Model: 4007128
Condition: NEW
$927.99 ea
Hays Twister 3/4 Race Torque Converter 97-2F24Q
Hays Twister 3/4 Race Torque Converter 97-2F24Q
Model: 4007132
Condition: NEW
$711.99 ea
Mustang Depot 2023