Maximum Airflow At Low RPM
Reduced Eng. Load At High RPM
Less Resistance At Hwy Speeds
More Horsepower
Better Gas Mileage
2.25 in. Projected Width
10000 RPM Rating
Standard Mounting Pattern
…
Quality reproduction heater cores are available for vehicles with or without air conditioning. All of our heater cores are the highest quality american made heater cores. This heater core can be used for vehicles with or without ac…
Reproduction heater hoses are made to factory specifications and feature original autolite markings. These are an exact reproduction, not a generic striped hose. Correct heater hose for your specific year features correct colored…
Newly designed abs plastic fan shroud is engineered to replace the original steel fan shroud and provide more air flow and greater cooling efficiency than the original shroud. Our new design is thicker than Other models and has a special…
Some sheet metal parts may require easily-accomplished cutting or modification to accomodate your particular vehicle. All sheet metal requires "fitting" for proper placing. and may require welding to accomplish installation. Lower…
Flex-a-lite® reversible 16-inch Syclone S-Blade electric-fan. A powerful electric motor helps this fan move an impressive 2,500 cfm of airflow. Can be used as an auxiliary or primary cooling.
Puller: Yes
Pusher: Yes
Fan CFM Range…
Set of 4 Mounting Hardware Included Reproduction of the original fan shroud bracket set used on 63/66 Falcons and Rancheros with 260, 289, and 302 engines. Comes complete as a set of 4 with mounting hardware.
…
S.A.Dearborn Classics offers high quality reproduction fan shrouds for most models of Ranchero, Fairlane and Torino. All of our fan shrouds are manufactured of durable ABS plastic and are manufactured in the U.S.A. Fan shrouds feature…
New chrome and raw steel thermostat housings are an exact replica of the original. Can be used on most small block Ford 260/289/302/351w applications.
…
Quality American assembled replacement heater cores are made to factory specifications and are available for models with and without air conditioning.
…
Replace that noisy or inopperative blower motor with these brand new units, designed to replace your original in fit and operation. The blower motor will improve airflow for your interior heating system as well as outside air through your…
Add the perfect finishing touch to your engine compartment with this officially licensed FoMoCo stainless steel hose clamp kit from Scott Drake. This 16-piece kit contains all of the heating, cooling and fuel line hose clamps needed for a…
Heater Box Clips
Holds Heater Box Halves Together
Ensures Air-Tight Seal
Set Of Four
When the time has come to replace the heater core or replace those rotten seals, you will need to separate the heater box assembly…
This elbow was used, in some cases, to reduce the water flow through the heater core.
In other cases, such as with the 289 and 302 engine, it was simply the hot water connection.
…
Bracket-Mounted All Aluminum Champion 3-Row Radiator With Fittings
Cools Up To Approximately 550 Horsepower
High-Flow Design With 3 Rows Of 5/8" Tubing
100% TIG Welded Seams With Brazed Cores (No Epoxy)
Thick Billet Fill…
Our Champion Pro series radiators are designed to cool your high performance engine and to keep you and your car on the road. The Champion Pro series is designed using 11/16” tubes. These radiators are built with three rows of tubes…
High-Horsepower street cars and trucks can be a challenge to keep cool. A proper cooling system is essential to maximizing your vehicles performance and increasing the longevity of your ride. Electric Fans and shrouds can improve the…
Quality reproduction heater cores are available for vehicles with or without air conditioning. All of our heater cores are the highest quality american made heater cores. This heater core can be used for vehicles with or without ac…
Now available is a complete line of high quality carter brand water pumps. Keep your engine cool with our brand new water pumps, includes mounting gasket. Universal application, for 6 cylinder. Numerous Ford part numbers depending on…
Now available is a complete line of high quality carter brand water pumps. Keep your engine cool with our brand new water pumps, includes mounting gasket. Quality carter brand water pumps!
…
We carry a complete line of radiators for most size engines. For heavy duty application. We offer both 3 and 4 core radiators. All radiators come with a one year warranty against defects in workmanship. 16 1/2 x 17 1/4 x 1 1/4 right inlet…
Billet specialties radiator caps are 2.5 Diameter and are machined from 6061-t6 billet aluminum. Knurled sides provide a positive grip. The billet top and radiator cap come unassembled to allow for proper positioning of the logo. Product…
Brand new radiator mounting insulators are made to match original specifications. Lower radiator insulator for 1968/1969 vehicles with 390, 427, and 428 engines.
…
Brand new radiator mounting insulators are made to match original specifications. Upper radiator insulators for 1967/1969 vehicles with 351, 390, 427, 428 engines. Sold in pairs.
…
Brand new radiator mounting insulators are made to match original specifications. Also fits: 66/67 Fairlane with 390, 67 Fairlane with 427, 63/67 Galaxie, 68 Galaxie (240,304).Fits 63 lower radiator with 8 cyl 260 and 289, 64 lower with…
S.A.Quality reproduction shroud used on 351 engine with air. Fits engines with air conditioning w/ 24 Radiator. Fits Mustang 68/69 w/289 and 302, also 68 GT 350 w/24 Radiator. Fan shrouds do not include mounting hardware. The height is 20…
S.A.High quality reproduction manufactured of abs plastic used on Torino and Rancheros equipped with big block 429 engines. Fits 70/71 429/429 cj only. Also fits 71 Mustang w 429 cj and scj. Fan shrouds do not include mounting hardware…
My Account
