Made by Scott Drake, OEM quality Coil Spring Insulators made from long lasting rubber. Two (2) per car are needed anytime you are replacing your springs.
…
These premium springs are made using high quality spring steel to assure a smooth stable ride that will last for years. They will also help lift that sagging rear end. Ford originally listed more than 24 different springs for the Mustang…
Premium Rear Mustang Leaf Springs
Made From Highest Quality SAE5160 Spring Steel
Custom Manufactured For Your Vehicle
Made Using OEM Blueprints
OEM Style Clamps
Correct "Hot Cup" Ends
Anti-Squeak Pads
Front Eye…
Original Ford front coil spring insulators. Original type coil spring insulator for the 3.5 inch front spring that insulates the chassis from excessive road noise. These insulators are sold each and require 2 (two) per vehicle.
…
Leaf spring anti squeak pads eliminate noise by reducing friction between leafs. Each spring requires twelve pads. Also used on 1968-1972 Ranchero and Torino.
…
Fits 1.63" bodies
Used with 2 1/2" springs
For coil over shocks with 1.63" O.D. body. Use with 2-1/2" I.D. springs.
Overall length of threaded sleeve is 4"
Length of threaded area is 3-3/8"
O.D. is nearly 2"
I.D. is…
Quality Restoration Part
2 Required
Replace your worn out shackles with this high quality kit. Our rear leaf spring shackle kit includes the metal shackles with hardware and all rear of leaf spring bushings. 1964-1973…
For maximum safety, braking, steering & suspension parts should always be replaced in pairs/sets to maintain proper alignment, steering, stopping & drivability. Always consult a trained service professional to ensure…
OE Style Quality Replacement Sold As A Pair Free Height = 16.68 Inches See Applications Below We carry original replacement brand coil springs. Our coil springs restore proper ride height and driving control when replaced. It is highly…
1 Set Of 4 Does Both Front Leaf Eyes Sleeveless Design Fits Better & Can't Corrode No Press Needed To Install Upgrade From Original Accurately locates the forward portion of the leaf spring which takes almost 75% of the spring load…
Original style leaf spring bushings used in front eyes of 57/71 rear leaf springs. Requires 2 kits per vehicle. Made in the USA! Note: Bushing O.D. : 2-1/16? Bolt Length 6-11/16?…
Reproduction Of Original Our rear leaf spring shackle kit includes the metal shackles with hardware and all rear of leaf spring bushings. Two kits required per car. One Kit Does One Side, So (2) Required Per Vehicle
…
For maximum safety, braking, steering & suspension parts should always be replaced in pairs/sets to maintain proper alignment, steering, stopping & drivability. Always consult a trained service professional to ensure vehicle…
Reproduction Of Original Sold Each Made In The U.S.A. Leaf spring clamp fits 2.5 inch wide leafs. Replace your worn or broken clamps when rebuilding or restoring your leaf springs. Requires (3) Per Side…
RideTech CoilOversThe System Includes: 2 Coil-Over Shocks + 2 Springs, with proper spring rate RideTech continues to offer today’s hot rodders the ultimate in ride quality, handling performance, technical support, and now…
PERFORMANCE MONO-TUBE STRUTNot just a replacement strut... The new RideTech performance struts are designed with handling performance and ride quality in mind.Features:
Steel Mono-Tube strut design
Oversized rod guides for maximum…
The HQ Coil Over System provides adjustable rebound tuning with our front & rear HQ CoilOvers. The System Includes: 2 Coil-Over Front Struts, 2 Coil-Over Rear Shocks & 4 Springs, with proper spring rate, and all mounting brackets…
RideTech Coil-OversThe System Includes: 2 Coil-Over Shocks + 2 Springs, with proper spring rate RideTech continues to offer today’s hot rodders the ultimate in ride quality, handling performance, technical support, and now…
PERFORMANCE MONO-TUBE STRUTNot just a replacement strut... The new RideTech performance struts are designed with handling performance and ride quality in mind.Features:
Steel Mono-Tube strut design
Oversized rod guides for maximum…
The LEVEL 2 system provides adjustable rebound tuning with our front & rear HQ CoilOvers. The System Includes: 2 Coil-Over Front Struts, 2 Coil-Over Rear Shocks & 4 Springs, with proper spring rate, rear upper and lower StrongArms…
Upgrade your 1979-1989 Mustang with HQ Series adjustable CoilOver Struts. You'll get high performance handling, exceptional ride quality and the ability to adjust your car's ride height. Our CoilOver Struts feature 24-position rebound…
The LEVEL 2 system provides adjustable rebound tuning with our front & rear HQ CoilOvers. The System Includes: 2 Coil-Over Front Struts, 2 Coil-Over Rear Shocks & 4 Springs, with proper spring rate, rear upper and lower StrongArms…
RideTech CoilOversThe System Includes: 2 Coil-Over Shocks + 2 Springs, with proper spring rate RideTech continues to offer today’s hot rodders the ultimate in ride quality, handling performance, technical support, and now…
Upgrade your 1979-1989 Mustang with HQ Series adjustable CoilOver Struts. You'll get high performance handling, exceptional ride quality and the ability to adjust your car's ride height. Our CoilOver Struts feature 24-position rebound…
The LEVEL 2 system provides adjustable rebound tuning with our front & rear HQ CoilOvers. The System Includes: 2 Coil-Over Front Struts, 2 Coil-Over Rear Shocks & 4 Springs, with proper spring rate, rear upper and lower StrongArms…
For use with a RideTech 4-Link System This Coil-over system is designed to provide the optimal ride quality and ease of installation for RideTech Bolt-On 4-Link systems.RideTech continues to offer today’s hot rodders the ultimate in…
HQ Series Adjustable Coilovers give your 1967-1970 Mustang high performance handling and adjustable ride height. 24-position rebound adjustment helps you fine tune the shocks to your driving preferences and vehicle demands. With large…
The RideTech CoilOver System for the 1967-1970 Mustang includes everything you need to give your vintage Mustang modern drivability. The package contains front upper and lower control arms, tall spindles, steering arms, inner & outer…
HQ Series rear CoilOvers for 64-66 Mustang. For use w/ RideTech 4 Link. Includes springs, sold as pair.RideTech continues to offer today’s hot rodders the ultimate in ride quality, handling performance, technical support, and now…
HQ Series adjustable CoilOvers give your 1964-1967 Mustang high performance handling and adjustable ride height. 24-position rebound adjustment helps you fine tune the shocks to your driving preferences and vehicle demands. With large…
The RideTech CoilOver System for the 1964-1966 Mustang includes everything you need to give your vintage Mustang modern drivability. The package contains front upper and lower control arms, tall spindles, steering arms, inner & outer…
Muscle cars have always been the backbone of hotrodding ... and now they are hotter than ever! The problem is nobody wants to put up with the ride quality, handling, and braking technology of 40 years ago. After driving a new Camaro or…
1.5? Lowered Stance
Higher Performance 180 lbs/in Spring Rate
Direct Bolt-On Installation
Durable, Gloss Black Powder Coat Finish
Take your 19641⁄2-1966 Mustang to the next level of performance for autocross and track
days…
1"
Lowered Stance
Higher Performance 180 lbs/in Spring Rate
Direct Bolt-On Installation
Durable, Gloss Black Powder Coat Finish
Take your 1967-1970 Mustang to the next level of performance for autocross and track…
For maximum safety, braking, steering & suspension parts should always be replaced in pairs/sets to maintain proper alignment, steering, stopping & drivability. Always consult a trained service professional to ensure vehicle…