The small wire ends that get crimped onto the wire ends to plug into the A-14487 wire connectors. These normally require a special wire crimping tool to install. I prefer to solder these in place instead. Strip about 1/4" of your wire, dip it in flux, stick into the bullet and solder. Then snip off the excess wire/solder or hit with a belt sander. Now you have a good positive connection. U.S.A.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Ford |
Model A |
1928 - 1931 |
