877.352.5355 Contact Us Mon-Fri 10a-6p & Sat 10a-3p EST

Earl's Performance Speed-Flex™ Line 64191926ERL

Earl's Performance Speed-Flex™ Line 64191926ERL
$49.99 ea
NEWARRIVING SOON!Estimated arrival: 04/11/20236 available from HOLLEY PERFORMANCE PRODUCTS as of 03/29/2023
Model: 4001469
Supplier has not provided any fitment data for this product.
[More Info]
Our factory assembled hoses are made from the same SPEED–FLEX stainless steel braid protected hose of extruded PTFE that is the world standard of the racing industry for flexible brake, clutch and instrument hoses. Hoses are assembled with Earl''s SPEED–FLEX crimp or swaged permanently installed hose ends. Each hose is pressure tested to 4,000 psi.
  • Use Of Extruded Teflon
  • Standard Of Racing Industry
  • For Flexible And Firmer Brake
  • For Flexible Clutch
  • For Instrument Hoses
  • Pressure Tested To 4000 psi
Holley Performance Emission Code 5: This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled (Non-Emissions Controlled) Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations
Installation Notes:
We have independent test lab reports on file showing that prototype assemblies exceeded D.O.T. recommendations in all categories. The only continuing test program however, is a 4000 P.S.I. hydrostatic pressure test of every hose assembly that we make. We do not claim that any individual hose assembly is certifiable to D.O.T. standards, and we therefore must advise you that they are sold for off-road applications only. We make no claim of usability or suitability for highway or road use. PTFE brake hoses must be installed by an experienced professional mechanic. After installation each hose must be clean and free flowing. There must be no possibility that the installed hose assemblies can be stretched, crimped, or kinked under any conditions of wheel travel and steering angle. As with any hose installation, periodic inspection of hose condition is essential.

About Earl's Performance

Earl's Performance Products was founded by Earl Fouts in 1955 in Lawndale, California. The mission was to supply high-quality military aircraft surplus plumbing components directly to the racing industry from a small retail outlet. As the military surplus market dried up, Earl recognized the need for continuity of supply for the racing market and pioneered the Earl's range of hoses and fittings that are still used today. In doing so he created the racing aftermarket plumbing industry.


Download Name File Size


Color Silver
Emission Code 5
Fluid Type Pump Gas, Diesel, Automatic Transmission Fluid, Coolant, Oil, Race Gas, Bio-Fuels, Brake, E85, Methanol/Alcohol
Fluid Type Rating - Automatic Transmission Fluid 5 out of 5 Rating
Fluid Type Rating - Bio-Fuels 5 out of 5 Rating
Fluid Type Rating - Brake Fluid 5 out of 5 Rating
Fluid Type Rating - Coolant 5 out of 5 Rating
Fluid Type Rating - Diesel 5 out of 5 Rating
Fluid Type Rating - E85 5 out of 5 Rating
Fluid Type Rating - Methanol/Alcohol 5 out of 5 Rating
Fluid Type Rating - Oil 5 out of 5 Rating
Fluid Type Rating - Power Steering Fluid 5 out of 5 Rating
Fluid Type Rating - Pump Gas 5 out of 5 Rating
Fluid Type Rating - Race Gas 5 out of 5 Rating
Fluid Type Rating - Vacuum 1 out of 5 Rating
Hose End #1 4 AN FEMALE
Hose End #2 4 AN FEMALE
Hose End Finish Electroless Nickel Plated
Hose End Material Steel
Hose Outer Material Stainless Steel Braided
Hose Size 4AN
Inside Diameter N/A
Length 26.000 in.
Material Braided Stainless Steel
Max Working PSI 2000 PSI
Min. Bend Radius 1.5"
Outside Diameter N/A
Part Type Fuel Hose
Product Length 26.000 in.
PTFE Wall Thickness .040"
Size 4AN
Submersible in Fuel Yes
Temperature Range -65⁰ to 450⁰ F
Wall Thickness 0.430 in.
WARNING CA Proposition 65 WARNING: Cancer and Reproductive Harm


Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:

Ask a question about

Earl's Performance Speed-Flex™ Line 64191926ERL:
Mustang Depot 2023