Inner tie rod end for 1960–1966 Ford and Mercury vehicles, designed to connect the steering rack to the outer tie rod and maintain precise steering geometry. This replacement part fits right- or left-hand applications for cars equipped with manual steering (MS) and 6-cylinder engines; V8 fitment varies by model—see fitment list. Built to restore proper steering response and reduce play, it provides durable performance, corrosion resistance, and reliable fitment for restoration or maintenance projects.
Features:
- Fits 1960–1966 Ford and Mercury models (right or left inner tie rod end; MS & 6‑cyl applications; V8 fitment varies—see vehicle-specific fitment).
- Precision-molded ball stud and housing to restore accurate steering alignment and reduce play.
- Durable materials and corrosion-resistant finish for long-lasting service life.
- Functions to secure the steering linkage, reduce vibration, and prevent premature wear of outer tie rods.
- Direct-replacement design for straightforward installation during restoration or maintenance.
- Sold individually; verify left or right and engine/steering type against vehicle fitment before ordering.
Installation / Application:
- Difficulty: 2/5
- Estimated time: 30-60 minutes per side
Instructions:
- Park vehicle on level ground, set parking brake, and chock rear wheels.
- Loosen the front wheel lug nuts slightly, lift the vehicle with a jack, and secure it on jack stands. Remove the front wheel.
- Locate the inner tie rod end on the steering rack and apply penetrating oil to the fasteners if corroded.
- Mark the position of the inner and outer tie rod threads relative to each other to preserve alignment, then loosen and remove the outer tie rod from the tie rod end using a tie rod end puller or pickle fork.
- Loosen the clamp or locknut securing the inner tie rod to the steering rack and unscrew the inner tie rod from the rack. Retain any seals or boots that are reusable, or replace them if damaged.
- Compare the new inner tie rod to the old unit to confirm correct length, thread direction (right- or left-hand), and fitment.
- Install the new inner tie rod by threading it onto the steering rack to the previously marked position. Torque the rack nut/locknut to the vehicle manufacturer's specification.
- Reattach the outer tie rod to the new inner tie rod and torque to specification. Replace any cotter pins or locking hardware as required.
- Reinstall the wheel, lower the vehicle, and torque the lug nuts to spec.
- Have a professional wheel alignment performed after installation to ensure proper steering geometry and tire wear.
About Redline Select
Redline Restomotive® has established itself as a premier brand in the world of classic car restoration, providing enthusiasts with high-quality parts that meet the exacting standards of original manufacturer specifications. Dedicated to the preservation of American automotive history, Redline Restomotive® combines advanced manufacturing techniques with an in-depth understanding of vintage vehicles. The result is a range of products that seamlessly blend into the design and function of classic cars, giving restorers and collectors the assurance that each part reflects the era’s style, quality, and performance.
Redline Select® is our premium line of steering and suspension products for all vehicle makes and models including both North American and Import vehicles. We have partnered with an ISO 9001/QS9000/TS16949 certified manufacturing facility with more than 40 years of experience in producing components that perform to the standards our customers expect. Our steering and suspension parts are backed by multiple quality control checks along the way—during production, prior to shipping from the factory, and at arrival. With our ISO 9001:2015 certification, we observe the world’s highest standards for quality management.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Ford |
Falcon Sedan Delivery |
1961 - 1965 |
| Ford |
Falcon |
1960 - 1965 |
| Ford |
Mustang |
1964 - 1966 |
| Ford |
Ranchero |
1960 - 1965 |
| Mercury |
Comet |
1960 - 1965 |
